|
|
|
|
|
|
|
 |
Reference
|
 |
|
Reference |
References in:
Austra, Denmark, England, Germany, Italy, Netherland, Poland, Slovakia, Sweden, Switzerland, USA
Vestas, Brighton, Colorado
Fully Automatic programming system for Wind Mill Blades.
Fendt, Germany
Cad-based Off-line programming system.
Magna, Germany
Cad-based Off-line programming system.
Bette GmbH, Delbrück, Germany
Cad-based Off-line programming system.
J. WAGNER GmbH, Germany
Cad-based Off-line programming system.
FedTech, New Hampshire, USA
Cad-based Off-line programming system.
Skagen Sandblæseri og skibsservice, Denmark
Fully Automatic programming system for Wind Mill Blades.
Vestas, Windsor, Colorado
Fully Automatic programming system for Wind Mill Blades.
Erbslöh, Germany
Cad-based Off-line programming system.
De Waal, Netherland
Fully Automatic programming system for windows and doors.
Morsø Stålbyg, Denmark
Fully Automatic programming system for structural steel.
Fenster Bünter, Switzerland
Fully Automatic programming system for windows and doors.
Helmut Schmidt University, Hamburg, Germany
Automatic programming system for re-search activities.
VW, Bratislava, Slovakia
Cad-based Off-line programming system.
Voestalpine Polynorm Grau, Germany
Cad-based Off-line programming system.
Idealcombi, Hurup, Denmark
Fully automatic robot programming system for windows.
Sauer-Danfoss, Nordborg, Denmark
Inropa Off-line programming system.
Contact person: Ingo Heumann
Bach Composite Industry, Hurup, Denmark
Inropa Off-line programming system.
Contact person: Jesper Kjær Nielsen
Scania, Södertälje
Inropa Off-line programming system.
Contact person: Magnus Pettersson
DAF, Eindhoven, Netherland
Inropa Off-line programming system.
ZF, Friedrichshafen, Germany
Inropa Off-line programming system.
ABB Hochspannungsprodukte, Hanau, Germany
Inropa Off-line programming system.
Contact person: Karl-Heinz Hoffmann
Cummins Engine Plant, Darlington, England
Vision system + CAD based off-line programming system.
Contact person: John Osborn
Brandt Industrilakering, Varde, Denmark
2 x Fully automated sensor based solutions for in-line programming.
Contact person: Jørn Brandt
SAS-Component, Kastrup, Denmark
Manual off-line programming system for sand blasting of air
craft wheels.
FKI Crisplant, Hornslet, Denmark
RobTeach system.
Contact person: Klaus Khæstel
RHI Refel, San Vito al Tagliamento, Italy
Automatic in-line programming system for sand blasting.
Reiter GmbH, Stuttgart, Germany
RobTeach lab system.
Contact person: Matthias Holzwarth
LacTec GmbH, Frankfurt, Germany
RobTeach lab system.
Contact person: Ralf Deparade
Marc Robotic Support, Birmingham, UK
RobTeach lab system.
Contact person: Keith Myatt
Stäubli Robotics, Bayreuth, Germany
Semi-automatic off-line programming lab system.
Contact person: Dr. Robert Schreier
Atensor Engineering, Steyr, Austria
Semi-automatic off-line programming lab system.
Contact person: Kurt Häusler
| |
(Ref. kuka)
(Ref. Idealcombi)
(Ref. Scania)
(Ref. FKI)
(Ref. Brandt)
(Ref. Brandt)
(Ref. Brandt)
(Ref. DAF)
(Ref. Sauer-Danfoss)
(Ref. Sauer-Danfoss)
(Ref. Sauer-Danfoss)
|
|
|
|
|
|
|
|
|
|
|
